Senect ONE 24 VDC

Multifunctional Aquaculture Controller
Measure and control one parameter (e.g. oxygen)
Feeding
Monitoring
Versatile applications: ponds, raceways, mesocosms, recirculation systems
Scalable & freely combinable: many units can be merged into an overall system in one software.
Wireless data transfer via WLAN Remote access and alarm via smartphone, tablet or PC

Technical Data
Dimensions: 191 x 140 x 90 mm
Power supply: 24 VDC
Sensor inputs: 1x universal input (compatible with all SENECT sensors)
Outputs: 3x actuator outputs
Protection class: IP54
Data transfer: 2.4 GHz WLAN, remote access via Dynamic DNS, port forwarding and IPv4

Smart oxygen control
Oxygen is measured with the low-maintenance and long-term stable optical O2S oxygen sensor.
If the oxygen concentration falls below a threshold, a solenoid valve, an oxygen concentrator or an aerator is activated depending on the type of aeration (24 V consumers directly, 230 V consumers via the optional Power Switch)
Multiple control loops are also possible! For example, if the O2 content falls below 70% saturation, the aerator is switched on (first stage). However, if the O2 concentration continues to fall, for example below 60%, additional technical oxygen is added via a solenoid valve (second stage).
SENECTONE - Economical, effective and universally applicable.

Automatic feeding
All common automatic feeders can be connected (AC automatic feeders via adapter module PowerSwitch)
Various setting options
Fixed feeding times (e.g. 8:00, 9:00, etc. for 30 s each)
At intervals (e.g. from 7 a.m. to 8 p.m. every 30 min for 15 s each)
Calibratable
Intelligent control
No feeding when oxygen content is low (e.g. below 70%)
Output switching depending on feeding (e.g. add O2 before, switch on light, etc.)
Convenient programming on the device itself or via smartphone, tablet or PC
Feed - Controlled, intelligent and as often as you like.

Installation
Simple and cost-effective
No data cables
Only power and, if applicable, oxygen connection required
Mount. Plug in. Set up. - Done!

Ideal for pond farming
One control per pond, offering all functions:
Aerator control
Feeding
Monitoring
Cost-effective to purchase and operate:
Small control unit: reduced to the essentials
No laying of data cables
Intelligent control reduces power consumption for aeration

The Senect Control App
The SENECT Control App is software for smartphones, tablets and computers (PCs and Mac) that allows SENECT control units to be operated.
Clear: Operation of all control units in one software
Convenient: Perform actions (e.g. feeding), make settings
Interesting: Graphical sensor measurement display
Important: Receive alarm messages

With the help of the SENECT Control App, you integrate your SENECT control units into your WLAN network and can thus use your smartphone, tablet or PC to make the respective settings, trigger actions, receive alarm messages, view sensor measured values live or save the recorded data locally (only with PC version).
For example, with the SENECT Control App, in the event of an alarm, e.g. if a set oxygen concentration falls below a certain level or if the filter stops (emergency stop), you can be notified via push message and email.
You can use the SENECT Control App to receive sensor measured values and the status of the respective devices (e.g. filter: last cleaning or solenoid valve: on / off) and thus keep an overview of your system.
Convenient programming on the device itself or via smartphone, tablet or PC