Senect Aquaculture Control PRO 150W with Alarm Output

Powerful. Smart. Connected.
6x Sensor Input: Any type of Senect sensors can be connected (e.g., O2, pH, ORP, water level, etc.)
5x Actuator Outputs with 24 V DC, 4 - 20 mA, 0 - 10 V
Coupling with PLC systems possible
Connection of third-party actuators such as automatic feeders or pumps (also via frequency converters) possible
Powerful, available with 150 W or 300 W power supply.
230 V AC outputs with Schuko sockets for controlling consumers such as pumps or lights
1 x High-Power 24 V DC output
All outputs are freely programmable, e.g., time- or sensor-controlled, but also dependent on other outputs
Intelligent automatic feeder and filter control
WLAN: Online alarm messages and monitoring

Technical Data
Dimensions: 265 x 254 x 127 mm
Power supply: 85 - 265 V AC, 47-63 Hz
Sensor inputs: 6x Senect sensors
Outputs: 1x High-Power output
5x Actuator outputs
3x 230 V AC
Protection class: IP54
Data transmission: 802.11 b/g/n 2.4 GHz WLAN, remote access via Dynamics DNS, port forwarding and IPv4
Power supply: 150 W
Alarm output: Yes

Advantages of SENECT's intelligent filter control algorithms
Low maintenance and resource-saving through:
the intensive cleaning program
the Eco Mode (up to 40% water savings)
automatic water refilling (with optionally available solenoid valve)

Security through:
Monitoring of water level and motor current (for 24 V DC motors)
Alarm messages in case of fault on smartphone, tablet or PC
Alarm also possible with warning light or as a signal to PLC
Remote access: Insight into past actions, measured values, and current status online

User-friendly:
easy installation thanks to plug connectors
subsequent installation possible on almost any filter
Operation directly on the device, but also conveniently via tablet or PC

Clever Software Functions
Control of outputs always possible with a specified time window, e.g., regulation active only from 7 am to 6 pm
Time control with individual times or intervals
Sensor-based control, e.g., via thresholds
Control dependent on another output (e.g., raise skimmer before feeding)
Actuator outputs also usable as alarm outputs (e.g., warning light, horn)
Intelligent automatic feeder control (e.g., also with calibration)
And much more!

The Senect Control App
The SENECT Control App is software for smartphones, tablets, and computers (PCs and Macs) that allows SENECT control units to be operated.

Clear: Operation of all control units in one software
Convenient: Perform actions (e.g., feeding), make settings
Interesting: Graphical sensor measured value display
Important: Receive alarm messages

With the help of the SENECT Control App, you can integrate your SENECT control units into your WLAN network and thus make the respective settings, trigger actions, receive alarm messages, view live sensor measured values, or save recorded data locally (only with PC version) via your smartphone, tablet, or PC.

For example, with the SENECT Control App, in the event of an alarm, e.g., if a set oxygen concentration falls below a certain level or if the filter stops (emergency stop), you can be notified via push message and email.

With the SENECT Control App, you can receive the sensor measured values and the status of the respective devices (e.g., filter: last cleaning or solenoid valve: on / off) and thus keep an overview of your system.