Kobre®Tec Continuous Belt Filter XL 120m3 Biovolume 500 L

The best technology for optimal water quality!
The Kobre®Tec endless belt filter reliably and fully automatically provides you with clear water. It is particularly suitable for koi and swimming ponds. The filter is equipped with a Senect Filter Control as standard.

Advantages at a glance:
Complete system including bio-stage
Very compact design, more compact than a drum filter
Positioning only 14.5 cm above pond level
Very fine filter fabric with only 74µ mesh size
The complete flush gutter is freely accessible and visible
Direct drive powerful 230 V geared motor
Can be used pumped or in gravity mode

Kobre®Tec endless belt filter advantages over commercially available endless belt filters:
Extremely robust stainless steel construction, therefore more solid and heavier than conventional endless belt filters
Angled corners for additional stability
Produced entirely without rust-prone welds
The substructure of the conveyor belt is completely made of stainless steel
No PE wear parts/rollers installed on the conveyor belt
Standard equipment with the original Senect Filter Control
High-quality geared motor Made in Germany
Optional lifting device for convenient installation in a filter shaft

Sustainable pond cleaning at the highest level:
In the production of the Kobre®Tec endless belt filter, we have focused on the highest quality standards. The substructure was made entirely of stainless steel. The geared motor also sets new standards.

Even the finest dirt particles are captured on the filter fabric with a mesh size of only 74µ. These are discharged into the wastewater through automatic flushing processes.
The Kobre®Tec endless belt filter is equipped with an original Senect Filter Control as standard. The comfort control regulates the flushing cycles and thus ensures minimal water consumption.

The belt flushing area with wastewater gutter is located inside the filter housing. The complete flush gutter is freely accessible and visible. It has a transparent cover, which reduces flushing noise to a minimum. The high-pressure pump included in the scope of delivery is also integrated into the bio-chamber in a space-saving manner.

The biomedium in the Kobre®Tec endless belt filter is optimally flowed through. Optionally, the bio-stage can be extended by an external bio-tub. This is particularly useful for high fish densities.

Technical data
Dimensions Length x Width x Height in mm 1180 x 1560 x 880
Integrated bio-tub yes
Bio volume 500 L
Koi pond up to max. liters 150000
Swimming ponds up to max. liters 300000
Flow rate min. l/h 150000
Flow rate min. l/h 30000
Flush pressure pump 5.7 bar / 230V / 1000 W
Belt drive 500 L
Flush pressure pump 5.7 bar / 230V / 1250 W
Belt drive 230 V / 250 W geared motor
Mesh size filter belt 74 µ single layer 1050 mm width
Weight approx. 190 kg
Inlets Ø in mm 8 x 110
Returns Ø in mm 4 x 110
Wastewater outlet Ø in mm 1 x 110
Housing Completely stainless steel V2A 1.4301
Standard control Senect Filter Control including electronic level probe and powerswitch for UVC lamps