Kobre®Tec Endless Belt Filter L 60m3 Biovolume 400 L

Best technology for optimum water quality!
The very high-quality Kobre®Tec continuous belt filter is ideally suited for larger koi and swimming ponds. The filter is equipped with a high-quality, original Senect Filter Control as standard.

Advantages at a glance:
Complete system including bio-stage
Very compact design, more compact than a drum filter
Positioning only 14.5 cm above pond level
Very fine filter fabric with only 74µ mesh size
The complete rinsing channel is freely accessible and visible
Direct drive powerful 230 V geared motor
Can be used pumped or in gravity mode
Kobre®Tec continuous belt filter advantages over commercially available continuous belt filters:
Extremely robust stainless steel construction, therefore more solid and heavier than conventional continuous belt filters
Angled corners for additional stability
Produced entirely without rust-prone weld seams
The substructure of the conveyor belt is made entirely of stainless steel
No PE wear parts/rollers installed on the conveyor belt
Standard equipment with the original Senect Filter Control
High-quality geared motor Made in Germany
Optional lifting device for convenient installation in a filter shaft
Sustainable pond cleaning at the highest level:
When manufacturing the Kobre®Tec continuous belt filter, we focused on the highest quality standards. The substructure was made entirely of stainless steel. The geared motor also sets new standards.

Even the finest dirt particles are captured on the filter fabric with only 74µ mesh size. These are discharged into the wastewater by automatic flushing processes.
The Kobre®Tec continuous belt filter is equipped with an original Senect Filter Control as standard. The comfort control regulates the flushing cycles and thus ensures minimal water consumption.

The belt flushing area with wastewater channel is located inside the filter housing. The complete flushing channel is freely accessible and visible. It has a transparent cover that reduces flushing noise to a minimum. The high-pressure pump included in the scope of delivery is also integrated into the bio chamber to save space.

The biomedium in the Kobre®Tec continuous belt filter is optimally flowed through. Optionally, the bio-stage can be extended by an external bio-tub. This is particularly useful with a high fish density.

Technical data
Dimensions length x width x height in mm 1180 x 1270 x 880
Integrated bio-tub yes
Bio volume 400 L
Koi pond up to max. litres 80000
Swimming ponds up to max. litres 160000
Flow rate max. l/h 80000
Flow rate min. l/h 20000
Flushing pressure pump 4.6 bar / 230V / 1000 W
Belt drive 230 V / 250 W geared motor
Mesh size filter belt 74 µ single layer 750 mm width
Weight approx. 150 kg
Inlets Ø in mm 5 x 110
Returns Ø in mm 3 x 110
Dirty water drain Ø in mm 1 x 110
Housing complete stainless steel V2A 1.4301
Standard control Senect Filter Control incl. electronic level probe and powerswitch for UVC lamps