Dolphin Bio S Pond Bio Pool Robot with Remote Control

The perfect cleaning robot for swimming ponds and natural pools.
More and more people are switching to a bio or natural pool. And there are many good reasons for this: clear and soft water, hardly any use of chlorine and other chemical additives. In addition, the plants not only take care of water purification, they also warm the pool.
However, a natural pool should also be cleaned regularly to keep it beautiful and clear.
Where conventional pool robots are only very limitedly suitable for natural pools and the phosphates in the natural pool can damage the electronics, a special pool robot is needed that is designed precisely for these conditions.

Dolphin has developed the Bio S for this purpose.

This offers optimal cleaning performance for pools up to 15 meters in length. The pond robot effectively removes leaves and other foreign bodies from the swimming pond, by internal filtering or external suction on the bottom, walls and waterline.

Maximum cleanliness
The triple active brushing motion (two bio-brush movements, an additional active brush with double speed) removes dirt and algae extremely effectively - even from slippery and uneven bottoms and walls.

Filtering and suction
Three internal filter modes and an external suction system via the pond pump are available. They guarantee a dust- and dirt-free pond and offer you the right solution for every degree of contamination.
The new filter cartridge system allows for a higher water flow, which increases the vacuum in the suction device. The result is a clean pond, with little effort and easy handling.
The filters can be easily removed from above. A quick rinse with the garden hose and the Bio S is ready for use again.
Note: The pond pump is not included in the scope of delivery.

Cost-effective, simple pond maintenance
Automatic cleaning saves time, effort and costs compared to manual cleaning. It also ensures that the water maintains its quality and balance, allowing the water to be used longer.

User-friendliness and performance
The pond robot guarantees precise scanning and complete cleaning right into the corners and curves of your pool. The internal gyro and sensors detect nearby walls. This makes it possible for the robot to avoid the regeneration area. Plant areas / second level are thus avoided and a complete cleaning is carried out within a short time.

Remote control for maximum comfort
The wireless remote control allows you to choose between automatic and manual operation. This way, you can also specifically target individual areas if necessary, without having to start a complete cleaning program.
In addition, cleaning programs, cycle length, intervals, ultraclean, pool rounds and waterline can be set via the remote control. This way you can really automate EVERYTHING if necessary.
Thus, the Bio S offers probably the most comprehensive remote controllability that one can imagine for a pool robot.

IMPORTANT: You can also use this pool robot in saltwater pools with a salt content of up to 0.5%.
However, please note that the device must be thoroughly cleaned both inside and out after use!

IMPORTANT: The natural pool must be thoroughly cleaned before the first use of the Bio S to remove biofilm and algae. Only then can the robot be used – and as often and regularly as possible, so that the pool does not get too dirty.
If the water should be more heavily contaminated, you should use the swimming hose and let the pump suck out the coarse dirt. This way the filter cartridges do not fill up so quickly.

IMPORTANT: You should always keep the device clean, as especially filamentous algae can cause the brushes to stop moving. To clean, simply remove the algae with tweezers.
You should also have the device inspected once a year. This applies to all pool robots, but especially to this one!

Scope of delivery of the Dolphin Bio S

Extremely comprehensive remote control
Swivel cable twist protection against cable breakage
2 / 3 / 4 hour cleaning program
18 m cable length
2 drive motors, 1 impeller motor
50 micron fine filter
100 micron filter for normal dirt
200 micron filter for coarse dirt
24 volt transformer
Caddy

Maximum hygiene
The pool robot not only cleans the floor, but also thoroughly cleans the walls and the waterline. This ensures an all-round clean bathing experience.

Easy cleaning
The filter cartridges can be easily removed from the top of the device. Simply rinse briefly with a garden hose and the pool robot is ready for use again.

Swivel cable twist protection
The patented Swivel prevents the cable from twisting. This significantly reduces the risk of cable breakage. This saves costly and nerve-racking repairs.

Pool scanning
The pool robot independently scans your pool and gets to know it better over time. This optimizes the paths, and even more complex pool shapes are cleaned thoroughly and effectively.

Active brushes
Thanks to the active brushes, the pool robot removes even stubborn dirt. In addition, it achieves an even more thorough cleaning result in a shorter time.

Water discharge at the top
The pool robot has the water discharge at the top. This has the advantage that it does not stir up the dirt on the bottom when it straightens up (e.g. when it moves up the wall).

Remote control
With the wireless remote control, the following functions can be conveniently set from the deck chair: cleaning programs, cycle length, intervals, ultraclean, pool rounds and waterline. Manual control is also possible via the remote control.

Easy maintenance
We have our own workshop for repairs and maintenance. This allows us to get your pool robot back in shape quickly and cost-effectively.
For many of our robots, the first inspection is even free!

Fast water drainage
When you lift the robot out of the pool, the water drains extremely quickly. This causes the device to lose weight accordingly quickly – and thus makes it much easier to lift out of the pool.

Caddy
The included caddy not only allows for easy and trouble-free transport – it also ensures that the device can be stored safely and neatly at all times.

Three filter modes
You have a choice of 3 different filters. In addition, there is external suction via the swimming pool pump. This ensures a dust- and dirt-free swimming pool – regardless of whether the contamination is slight or extreme.

Gyro sensors
The built-in gyroscope sensors and intelligent sensors that detect nearby walls and help the robot avoid the water treatment area guarantee a complete mapping of the swimming pool in the shortest possible time.

Filter full indicator
It indicates in good time when the filter is full. Then you should clean the filter, as a full filter can no longer deliver optimal cleaning results.

Triple active brushes
Unique triple-active brushing system: two bio-brushes and an additional brush with double speed. This removes dirt, algae and bacteria even from extremely slippery and uneven bottoms and walls.